Fuel Lube & Fragrances

Alky Race Products

– 100% Australian made products
– Non-Flammable, Non-Hazardous and Biodegradable
– Scientifically formulated for safe use in all Methanol/Nitro fuelled engines

Fuel Flush

Fuel Flush absorbs residual methanol/nitro and leaves a lubricating film to protect against fuel gelling damage and corrosion. It also lubricates superchargers, valve guides, fuel pumps, barrel valves, solenoids and other fuel components to provide engine protection at start-up.

On start-up Fuel Flush will readily dissolve in methanol/nitro fuels and can be rinsed off hands or components with water as required.

Fuel Flush is used between races as a cleaner, lubricant and protectant for all fuel system components. Fuel Flush absorbs residual fuel from above the piston rings and throughout the fuel system. Fuel Flush prevents dry starts by leaving a protective lubricating layer. On initial start up Fuel Flush is burnt in combustion and flushed from the system. Non-flammable, non-combustible, non-hazardous and biodegradable, Fuel Flush readily dissolves in Alky and Nitro fuels without separating or settling in fuel tanks. Fuel Flush is not a fuel additive.

Currently racers use penetrating oil which is combustible, flammable, hazardous and not biodegradable! Penetrating oils do not mix with Alky or Nitro fuels and consequently form sludge in fuel tanks.

Fuel Lube

Fuel Lube has been specially formulated for use in methanol/nitro fuels without affecting fuel specific gravity. Fuel Lube adds lubrication to fuel while helping to reduce wear on engine components. Fuel Lube is designed to stop fuel gelling and will not settle at the bottom of fuel tanks.

Mix Ratio is 50ml to 20 ltrs
150ml to an average 60ltr tank
500ml bottle will treat 200 ltrs

Fuel Lube is a fuel lubricant additive. Fuel Lube does not change the specific gravity of fuels or enhance the performance of the fuels. Non-flammable, non-combustible, non-hazardous and biodegradable, Fuel Lube readily dissolves in Alky and Nitro fuels without separating or settling in fuel tanks.

Pump Lube

Pump Lube has been specially formulated for use in methanol/nitro fuel pumps and is a thick viscous fluid that adheres to fuel pump gears for better wear protection. Pump Lube absorbs residual methanol/nitro and leaves a lubricating film to protect against pump gear galling and corrosion. On start-up Pump Lube will readily dissolve in methanol/nitro fuels and can be rinsed off hands or components with water as required. Pump Lube can be used as an assembly lube for all fuel system related components.

Pump Lube is a thick viscous lubricant for cleaning and lubricating mechanical fuel pumps between races. Pump Lube adheres to pump gears and absorbs residual fuels to protect against wear, corrosion and prevent dry starts. Pump Lube is used as an assembly lubricant for all fuel system components. On initial start up Pump Lube is burnt in combustion and flushed from the system.
Non-flammable, non-hazardous and biodegradable, Pump Lube readily dissolves in Alky or Nitro fuels without separating or settling in fuel tanks. Pump Lube is not a fuel additive.

Currently racers use silicone or penetrating oil which is combustible, flammable, hazardous and not biodegradable. Silicone/mineral penetrating oils do not mix with Alky or Nitro fuels and consequently form sludge in fuel tanks.

E85 Fuel Lube

E85 Fuel Lube has been specially formulated for use in E85 fuels without affecting fuel Quality. E85 Fuel Lube adds lubrication to fuel while helping to reduce wear on engine components. E85 Fuel Lube is designed to stop fuel gelling and will not settle at the bottom of fuel tanks. Adding lubrication and protection to electric fuel pumps and injectors, E85 Fuel lube will leave a protective lubricating film behind when the fuel has evaporated and then disolve in the presence of new fuel. “E85 Fuel Lube is superior protection for your fuel system”

Ratio is 50ml to 20 ltrs
150ml to an average 60ltr tank
500ml bottle will treat 200 ltrs

E85 Fuel Lube is a fuel lubricant additive. It does not change the specific gravity of fuels or enhance the performance of the fuels.
Non-flammable, non-hazardous and biodegradable, E85 Fuel Lube readily dissolves in E85 fuels without separating or settling in fuel tanks.

Manhattan Oil Fuel Fragrances

Blends clear. Eliminates eye, nose, and throat irritation. Eliminates harsh odours. Safe for all internal combustion engines. Safe for O2 sensors. Does not inhibit or enhance performance. For best results use in vehicles without catalytic converters.

1 x 118ml bottle treats 200 litres of Methanol.
For E85 and other fuels you will need to play around with the quantity until you’re happy as they’re harder to mask than Methanol.

Use Fuel Lube alone or with a fuel fragrance.