Powerplus Racing Fuels


Powerplus Racing Fuels are AUSTRALIAN MADE and committed to being actively involved in customer success.

Powerplus is a division of the ACB Group – An Australian owned and operated specialist manufacturer and supplier to the chemical industry.

Powerplus was spawned out of the necessity to supply independent service stations with a premium 98 octane fuel which was only available from the big 3 producers.

Soon after Powerplus Fuels purchased a VX V8 Supercar and as we increased the fuel technology of the vehicle and assisted in other race classes we were able to further refine the technology of the fuel manufactured and radically expand the types of race fuels manufactured to cover all facets of motor sport.

Powerplus Racing Fuels reputation has now grown to be synonymous with superior performance and consistency. We have focused on making power for race teams, without the distractions inherent to our competitors businesses.

This attention to detail ensures every litre of Powerplus Racing Fuel meets the highest quality standards. The ability of Powerplus to have total control over its products and manufacturing ensures our ongoing success. Also as part of our manufacturing facility we operate one of Victoria’s largest analytical and research laboratories, 580M2 devoted to the ongoing evolution of race fuels and automotive additives.

All Powerplus Racing Fuels and additives are manufactured, packaged, tested and stored at our site located in the Melbourne suburb of Derrimut.

As a manufacturer and supplier, one of our long standing markets has been in the automotive after market care additives. We have long provided the market via our private labelling operations with additives like octane boosters, fuel and engine additives as well as the paint and panel market.

Powerplus NSW are the New South Wales distributor of Powerplus Racing Fuels and products, located in Wyong on the Central Coast.

Please see below for a description of the main fuels available, but keep in mind we can create any mix you desire.


Tuning When Changing Fuels

All fuels may be similar but slight differences in specific gravity/viscosity/additives will mean they can flow differently through your fuel delivery system. Under wide open throttle (where race engines spend most of their time) this could cause your engine to run richer or leaner depending on the existing tune, which could cause the engine to run too lean and cause an engine failure.

For this reason we strongly recommend tuning your bike/car to suit the specific fuel you are using (re-tune when you change fuels) or as a minimum richen your engine one jet size and work from there.

When using consistent quality race fuels like Powerplus proper tuning of your engine will give you more power and smoother fuel curves giving you safe, strong & repeatable performance.

– Martin


Available in 5Lt, 20Lt and 200Lt drums.


Powerplus E85

PPRF_20L_E85Powerplus E85 is a renewable fuel source that is also environmentally friendly. Its performance is comparable to 116 octane race fuel. Your engine will run cooler and your ETs will be less affected by atmospheric changes.

Powerplus E85 is not corrosive like methanol, it includes all the anticorrosive’s and lubricants found in Powerplus 98+ and does not leave carbon deposits like petrol so maintenance is reduced across the board. Your spark plugs and oil stays looking like new.

NOTE: Not compatible with fibreglass tanks. Prohibited for aviation purposes.

Powerplus E85 Product Data Sheet

MSDS

Powerplus E98+

Powerplus E98+ is a renewable fuel source that is also environmentally friendly.

Its performance is comparable to 125 octane race fuel. Your engine will run cooler and your ET’s will be less affected by atmospheric changes. Powerplus E98+ is not corrosive like methanol it includes all the anticorrosive’s and lubricants found in Powerplus 98+ and does not leave carbon deposits like petrol so maintenance is reduced across the board. Your oil stays looking like new.

-Increases oxygen intake, increase in boost pressures and reduces exhaust temperature.
-Engines run cooler and are less subject to corrosion.
-Recommended for all legal Ethanol racing applications.
-Powerplus E98+ is manufactured in Australia.

Powerplus E98 Product Data Sheet

MSDS (Same as E85)

Powerplus 98+

PPRF_20L_98Powerplus 98+ is a new generation, high performance, high octane petrol formulated to exceed existing fuels available at the pump in Australia. With a RON of over 98 Powerplus 98+ ensures optimum engine efficiency, improved engine responsiveness and a cleaner burn to become the fuel of choice for high performance and high compression engines.

Please note: Where engines require the use of leaded petrol to protect valve seats, a valve seat recession additive should be used. Powerplus 98+ is not for use in aviation applications. Do not store in fibreglass tanks or containers.

Powerplus 98 Product Data Sheet

MSDS

Powerplus 99+

PPRF_20L_99Powerplus 99+ is MA homologated/approved for use in all motorcycle Australia classes. A new generation environmentally friendly, high performance and high octane unleaded petrol which ensures optimum engine efficiency. It provides consistent, crisp and responsive acceleration with a cleaner burn which will allow race teams to push their engines to the limit and keep ahead of their competition.

Please note: Where engines require the use of leaded petrol to protect valve seats, a valve seat recession additive should be used. Powerplus 99 is prohibited for use in aviation applications. Do not store in fibreglass tanks or containers.

Powerplus 99 Product Data Sheet

MSDS

Link to PP99 approval on Motorcycling Australia’s website –
http://www.ma.org.au/index.php?id=1984.

Powerplus 100+

PPRF_20L_100Powerplus 100+ Unleaded is specifically engineered for high-performance, exotic street cars including muscle cars, street rods and more. It’s environmentally friendly and street legal throughout Australia in applications with anything from 4 to 12 cylinders or engines equipped with a turbocharger, supercharger or nitrous oxide system (NOS), Powerplus 100+ will generate optimum power and performance in turbocharged or supercharged applications, it allows an increase in boost without fear of detonation.

Please note: Where engines require the use of leaded petrol to protect valve seats, a valve seat recession additive should be used. Powerplus 100+ is not for use in aviation applications. Do not store in fibreglass tanks or containers.

Powerplus 100 Product Data Sheet

MSDS

Powerplus 102+

PPRF_20L_102Powerplus 102+ Unleaded Racing Fuel is specifically engineered for normally aspirated and Turbo – Super Charged engines. Compression Ratios from 8:1 to 14:1. It is formulated with power enhancing oxygenates, to help engine builders and race teams push their engines to the limit when competing in events where maximum power and torque is required. Suitable for engines developing up to 650+ Horse Power.

Please note: Where engines require the use of leaded petrol to protect valve seats, a valve seat recession additive should be used. Powerplus 102+ is not for use in aviation applications. Do not store in fibreglass tanks or containers.

Powerplus 102 Product Data Sheet

MSDS

Powerplus 105+

PPRF_20L_105Powerplus 105+ Unleaded Racing Fuel is specifically engineered for normally aspirated and Turbo – Super Charged engines. Compression Ratios from 13:1 to 15:1. It is formulated with power enhancing oxygenates, to help engine builders and race teams push their engines to the limit when competing in events where maximum power and torque is required. Powerplus 105+ Racing Fuel is the ultimate in unleaded high-performance fuels. Suitable for engines developing 700-850 Horse Power.

Please note: Where engines require the use of leaded petrol to protect valve seats, a valve seat recession additive should be used. Powerplus 105+ is not for use in aviation applications. Do not store in fibreglass tanks or containers.

Powerplus 105 Product Data Sheet

MSDS

Powerplus 108+

PPRF_20L_108Powerplus 108+ is a new generation, high performance, high octane petrol formulated to exceed existing fuels available at the pump in Australia. With a RON in excess of 108,  Powerplus 108+ ensures optimum engine efficiency, improved engine responsiveness and a cleaner burn to become the fuel of choice for high performance and high compression engines.

Please note: Fuel delivery system must meet or exceed SAE J2260. Teflon recommended. Where engines require the use of leaded petrol to protect valve seats, a valve seat recession additive should be used.

Powerplus 108 Product Data Sheet

MSDS

Powerplus 110+

PPRF_20L_110Powerplus 110+ Unleaded Racing Fuel is specifically engineered for normally aspirated and Turbo – Super Charged engines. Compression Ratios greater than 15.5:1.
The most powerful high octane unleaded fuel available.
It is an excellent performance fuel for Drag Racing where a higher octane fuel is required. PowerPlus 110+ allows you to push the limits of octane satisfaction.
Suitable for engines developing up to 1600 Horse Power.

Please note: Powerplus 110+ is designed for extremely high compression engines greater than 15.5:1, Cold start can be problematic and spark plugs should be cleaned after each run. Fuel delivery system must meet or exceed SAE J2260. Teflon recommended. Where engines require the use of leaded petrol to protect valve seats, a valve seat recession additive should be used. Powerplus 110+ is not for use in aviation applications. Do not store in fibreglass tanks or containers.

Powerplus 110 Product Data Sheet

MSDS

Powerplus Diesel

Powerplus Racing Diesel is a high performance diesel fuel suitable for all diesel powered equipment including: High speed diesel engines, passenger cars, SUVs, trucks, agricultural, military, power generation, heating equipment, on-road, off-road and industrial applications.

Our diesel formulation is designed to deliver optimal engine performance. Powerplus Racing Diesel contains an advanced technology additive system which maintains fuel injector cleanliness and protects fuel system components and increases cetane numbers, to ensure engines operate at peak efficiency and performance.

Benefits
Breaks down and removes deposits left behind on critical parts of the engine. Proven demulsibility characteristics to ensure water and suspended material do not foul fuel systems. Controls fuel injector deposits and helps inhibit the build up of deposits on intake valves that affect the flow of the air fuel mixture into the engine. Also reduces exhaust emissions.

Powerplus Diesel Product Data Sheet

MSDS

Powerplus Methanol

PPRF_20L_RMPowerplus Methanol has a 99.9% minimum purity and is triple filtered- the highest purity available in Australia. Engines run cooler and are less subject to corrosion. Recommended for all methanol legal racing applications.

Powerplus Methanol Product Data Sheet

MSDS

Powerplus Special Blends

Dial up your own octane. As a manufacturer we can offer a blend specifically designed for your engine. Contact us to discuss your requirements and we will manufacture a fuel to meet your racing needs.